BACnet Fire 3rd Party Symbols

When integrating the BACnet Fire 3rd Party extension, the following symbols are available in graphics:

DYN_All_BACnetFire_Command_DisabelEnable_Central_001

  • Default command symbol for zones (LSZ) and detectors (LSP) graphic commands.
  • It is a toggle button that displays Disable or Enable commands depending on the current point status.

 

DYN_All_Generic_Command_AnalogOutput_Central_001

  • Default command symbol for Analog Output and Analog Value.
  • Enter or increase/decrease the value and send it by pressing Enter.

 

DYN_All_Generic_Command_AnalogOutput_Central_002

  • Secondary command symbol for Analog Output and Analog Value.
  • Enter or increase/decrease the value and send it by clicking Send.

DYN_All_Generic_Command_AnalogOutput_Central_003

  • Secondary command symbol for Analog Output and Analog Value.
  • Use the slider to increase/decrease the value and send it.

 

DYN_All_Generic_Command_AnalogOutput_Central_004

  • Secondary command symbol for Analog Output and Analog Value.
  • Use the slider to increase/decrease the value and send it by clicking Send.

 

DYN_All_Generic_Command_DigitalOutput_Central_001

  • Default command symbol for Binary Output and Binary Value.
  • Use the drop-down list to choose the value and send it by pressing Enter.

 

DYN_All_Generic_Command_DigitalOutput_Central_002

  • Secondary symbol for Binary Output and Binary Value.
  • Use the drop-down list to choose the value and send it by clicking Send.