Link Parameters for InfoCenter

Properties of Links

Parameter

Label

Value

P1

Report Template

Name of the report template.

P2

Format

Output format of the report may be PDF, HTML, XLSX, DOCX.

This is a required value.

P3

Template ID

Unique id allotted to report templates.

TIP: This Id can be obtained by running the Template Information Report.

P4

Control Id 1

Depending on the number of control present in the report template, enter the respective control Id’s.

TIP: Control Id’s corresponding to a report template can be obtained from the Template Information table.

NOTE: Enter the Control Id’s in the same order in which the control are added to the template.

P5

Control Id 2

P6

Control Id 3

P7

Control Id 4

P8

Control Id 5

P9

Additional Information

Mandatory Field. Specifies the type of data which is displayed in the report.

Note: The format of Additional Information should be as mentioned in the above examples only

The following are sample values for all reports, except for the Audit Trail Report:

  • "FillDownFlag" : 'Y', "ReportType" : 1
  • The value of FillDownFlag can be either 'Y' or 'N'
  • The value of Report Type is as follows when the value of the point data set in InfoCenter is set to:
    • 1 = Trend
    • 2 – Alarms
    • 3 - Trend and Alarms

Format for Audit Trail Report:

  • "IsSystemName" : 'Y', "SystemName" : '*', "OperatorName" : '*'

P10

Query Param 1 Key

Value = ControlID6

This is explicitly provided for the AHU Report which has a 6th control.

P11

Query Param 1 value

The value of the AHU Report’s 6th control is entered here.

P12

(R) Data Range

The value can be any of the following and are case sensitive:

- last week

- last month

- last quarter

- last year

- current week (for running the report for yesterday)

- current month (for running the report for month-to-date)

- current year (for running the report for year-to-date)

NOTE: This field is required while executing reports through fixed links, otherwise it is not required.

P13

from time

The start time of the day from when you want the report data to be evaluated.

The value must be entered in the following format: hh:mm:ss
For example: 00:00:00

NOTE: This field is required while executing reports through fixed links, otherwise it is not required.

P14

to time

The end time of the day when you want the report data to be evaluated.

The value must be entered in the following format: hh:mm:ss
For example: 23:59:59

NOTE: This field is required while executing reports through fixed links, otherwise it is not required.

P15

fill down

The value for fill down flag

This value is either Y or N

NOTE: This field is required while executing reports through fixed links, otherwise it is not required.