Configure the BACnet Server Connection
- You have read the BACnet Server Network Considerations topic to understand your configuration options.
- Select Project > Management System > Servers > Main Server > BACnet Server.
- Click the BACnet Server tab.
- In the BACnet Server Connection Configuration section, click Add, and then select IPv4.
NOTE: If you want the BACnet server to connect to additional physical networks, you can add more IPv4 connections (but you do not need additional virtual networks).
- From the Adapter list, select the adapter you want to use for this configuration.
- Enter a UDP Port number based on your network configuration.
- From the IP Address list, select the address you want to use for the physical network.
- In the BACnet Server Settings section, click Add, and then select Virtual.
NOTE: The network number must be unique on your BACnet system. The port ID must be unique in this list.
- Click Save .
- Click Yes to restart the BACnet Server.
- The BACnet Server restarts, and the status in the Extended Operation tab changes to
Running
.
See also