Import Configuration Data

  1. To speed configuration, make sure the Desigo CC Transaction Mode is set to Simple or the Automatic Switch of Transaction Mode is set to True.
    The automatic switch setting is recommended. Without it, to re-enable the logs, you need to set the Transaction Mode to Logging at the end of the configuration procedure.
  1. Navigate the file system:
    [Installation Drive]:\[Installation Folder]\GMSMainProject\profiles\SNMPDataTemplate\.
  2. Copy the file that corresponds to the SNMP device created:
    - Win32_UninterruptiblePowerSupply.Riello.1_0.SNMP
    to the following directory:
    [Installation Drive]:\[Installation Folder]\[Project Name]\devices
  3. Select Project > Field Networks > [Riello UPS network] > [device].
  4. In the System Management tab, click Import .
  5. In the Select device to import dialog box, select the SNMP file that corresponds to the appropriate device version.
  6. Click Import.
  7. When the import is completed, the device properties are configured in the Properties tab.
  8. In the General Settings expander, modify the IP address in the Host name field.
  9. Click Save .