(Optional) Configure the TCP port and IP address of the RDF302 room thermostat

(Optional) Configure the TCP port and IP address of the RDF302 room thermostat

You can change the TCP port and IP address used by an RDF302. These changes are lost if the data is imported again. Therefore, you can change the settings in the import file so that the correct settings are applied during a later import.

  1. Select Project > Field networks > [RDF302 Network] > [Interfacename].
  1. In the Modbus tab, open expander Communication interface.
  1. Change the imported TCP port or IP address.
  1. Select Save .