Inhibit or Isolate an SPC Zone

The inhibit and isolate commands let you bypass an intrusion zone, to temporarily exclude it from the system. This enables you to, for example, arm an intrusion area even if one of its zones has active inputs.

  1. Select Project > Field Networks > SPC network > [SPC panel] > […] > [area] > [zone].
  1. In the Extended Operation tab, next to the Mode property, click the required command:
  • Inhibit to turn the zone off.
  • Isolate to cut the communication with the zone.
  • Deinhibit or Deisolate to re-enable the zone.