Configure the Sankey Report

  1. You have selected the Sankey report type for configuration.
  • The Report Definition configuration page displays.
  1. To configure the Sankey report perform any of the following steps:
  • In the Source expander, click the Sync icon to synchronize the devices in the Powermanager node with the Sankey Tree node.
  • In the Source expander, click on Create icon to add a new node to the Sankey tree.
  1. Enter the name of the root node in the Root Name field.
  1. Enter the root unit in the Unit field.
  1. Click New to add the required Measurement Point to the selected group/element in the Sankey tree.
  1. Enter values into the following columns:
    a. Select the required measurement point from the drop-down list under the Measurement Point column.
    b. Unit
    c. Factor
    d. Converted Unit
  1. Click Save .
    NOTE: If the selected measurement point is not archived, a warning message will be displayed. You can save the report definition with warning. However, if the measurement points are not archived, the generated reports will not have any values.
  • The Save Object As dialog box displays.
  1. Enter a name and description and click OK.
  • The Sankey report definition is configured.

You can create a new node within the Sankey tree after the use of the Sync function.