Configuring STT20 on FCnet
Scenario
You want to configure Desigo CC for connecting to an STT20 fire system on a BACnet network.
For background information, see the reference section.
Prerequisites
- The CMSI STT20 extension module is installed and included in the active project.
- System Manager is in Engineering mode.
- System Browser is in Management View.
- The communication network planning is complete and the following BACnet information is available:
- BACnet addresses: Device IDs.
- UDP port number.
- The SiB-X metafile exported from the STT20 tool is available.
Overview
1 | Configure the BACnet Driver for STT20 |