Download the STT Configuration to the NK823x

  1. In System Browser, select Project > Field Networks > [BACnet network] > [NK823x].
  1. Select the NK8000 tab.
  1. (Optional) Open the Configuration expander, and configure the file transfer mode to apply to subsequent downloads (the current download applies the mode that is currently set).
    This option is set to Use secure download by default (encrypted data transmission on TCP port 20500). If you have a local and safe connection to NK823x, you may want to deselect the check box and apply a faster FTP passive mode. Proceed as follows:
    a. Deselect the check box. Note the warning message about potential vulnerabilities.
    b. Click Save .
  1. Click Download configuration.
  • A confirmation box displays.
  1. Click OK.
  • The download starts. After a few minutes, the new configuration is active.
    NOTE: Depending on the type of modification, the NK823x may need to restart to complete the procedure.
NOTICE
Security Vulnerabilities

The use of the FTP mode on public or unsecure networks creates serious security vulnerabilities. For more information, refer to the NK823x Security section.